Diy disco lights

How to make your own disco lights

COMPONENTS AND SUPPLIES

InventrKits HERO

The HERO is a derivative of “Arduino UNO R3 Reference design” we just changed up a few things to make it our own. If you’re curious about what goes into our HERO board we published the open-source hardware files on our GitHub.

1

Male to Female Wire

4

SMD RGB LED

1

NECESSARY TOOLS AND MACHINES

Laptop

APPS AND ONLINE SERVICES

ABOUT THIS PROJECT

This lady forgot to buy disco lights for her party.

So she made her own.

And so this lady and other lady had fun at the disco party.

Video https://drive.google.com/file/d/11tp6oxvhaTzjg5V3IdAXQO5nniw9TPfx/view?usp=sharing

SCHEMATICS

COMMENTS

Leave a Reply

Your email address will not be published. Required fields are marked *

int redpin = 11; // select the pin for the red LED int bluepin = 10; // select the pin for the blue LED int greenpin = 9 ;// select the pin for the green LED int val; void setup () { pinMode (redpin, OUTPUT); pinMode (bluepin, OUTPUT); pinMode (greenpin, OUTPUT); Serial.begin (9600); } void loop () { for (val = 255; val> 0; val –) { analogWrite (11, val); analogWrite (10, 255-val); analogWrite (9, 128-val); delay (10); Serial.println (val, DEC); } for (val = 0; val <255; val ++) { analogWrite (11, val); analogWrite (10, 255-val); analogWrite (9, 128-val); delay (10); Serial.println (val, DEC); } }
PROJECT AUTHOR
Leave a comment
TEAM MEMBERS
Leeza Unzicker & Lucy Hunter

Leeza: Wiring, Acting, and Editing (in video) Lucy: Coding, Acting.

TABLE OF CONTENTS
Leave a comment
Share on whatsapp
Share on facebook
Share on twitter
Share on linkedin
Share on reddit
Share on pinterest
Share on email

SIMILAR PROJECTS YOU MIGHT LIKE

I cascaded four SN74HC595 shift registers to control 32 LEDs on 4 registers using 3 wires. I am adding a I2C 20×4 LCD screen to display the register and led values. I might add a standard 16×2 LCD screen to show up it is done.
A simple light meter. It’s not calibrated to any meaningful scale, but the digital readout shows a higher number the brighter is the light falling on the photoresistor.
I got the Inventr Mega kit and started work on a lock for a door by using a 4×4 keypad, Uno, 20×4 LCD, and some resistors.